@article { author = {Najafpour, N. and Shayannejad, M. and samadi, hossein}, title = {Investigation on Seepage Pattern and Design of Toe Drain in Homogenous Earth Dam on Impervious Foundation Using Physical Model and PLAXIS}, journal = {Water and Soil}, volume = {28}, number = {3}, pages = {451-461}, year = {2014}, publisher = {Ferdowsi University of Mashhad}, issn = {2008-4757}, eissn = {2423-396X}, doi = {10.22067/jsw.v0i0.39492}, abstract = {Pore pressure, seepage and drainage discharge through in earthen dams are the most important characteristics that have to be defined in order to analysis an earth dam. These parameters have been measured since beginning of building dam. In this investigation, a physical model of homogenous earth dam created in the flume with three different angles of toe drain, then pore pressure of earth dam was measured by piezometers that put on the wall of the flume. Discharge of drainage was measured too. The seepage analysis was conducted by PLAXIS software then Result of the PLAXIS compare with physical model by SAS (Statistic software) and finally the best angle and without dimension index ,p/h, propose for toe drain according to results & observations.}, keywords = {Earthen dam,Seepage,Toe drain,Pore pressure,Physical Model}, title_fa = {بررسی الگوی عبور خطوط نشت و طراحی زهکش پنجه در سدهای خاکی همگن روی پی نفوذ ناپذیر با استفاده از مدل فیزیکی و نرم افزار PLAXIS}, abstract_fa = {از مهمترین ویژگی ها یا کمیت های مورد نیاز در بررسی ها و تحلیل های یک سد خاکی، اندازه گیری فشار آب منفذی، میزان نشت و زه خروجی از بدنه و پی آن است که اندازه‌گیری این کمیت ها از همان شروع ساخت سدآغاز می گردد. به دلیل کمبود مطالعات قبلی برای سد‌های خاکی همگن با زهکش پنجه و با استفاده از مدل فیزیکی، در این تحقیق مدلی فیزیکی از یک سد خاکی همگن در فلوم آزمایشگاهی با هدف بررسی و تعیین زاویه بهینه و شاخصی بی بعد در طراحی زهکش پنجه ای، اجرا گردید سپس میزان فشار منفذی با پیزومترهای نصب شده در بدنه ی فلوم و مقدار دبی نشت به صورت حجمی اندازه گیری شد. در آخر فشار و دبی های اندازه گیری شده در آزمایشگاه با نتایج نرم افزارPLAXIS با استفاده از نرم افزار آماری SAS در سطح اعتماد 95 درصد برازش و زوایای 45 و 60 درجه و شاخص بی بعد 35/0= p/h به عنوان معیار‌های بهینه برای طراحی زهکش پنجه‌ای تعیین گردید.}, keywords_fa = {شاخص بی بعد p/h,پیزومتر,فلوم آزمایشگاهی,فشار منفذی,دبی نشت}, url = {https://jsw.um.ac.ir/article_37678.html}, eprint = {https://jsw.um.ac.ir/article_37678_fc83422e78c33287939827de8741ed50.pdf} }