Document Type : Research Article

Authors

1 Ferdowsi University of Mashhad

2 ferdowsi university of mashhad

Abstract

Introduction: Laccases are potent enzymes that are capable of oxidizing various phenolic and non-phenolic compounds as well as resistant environmental pollutants. One of the most effective methods for improving their properties, such as increasing the stability of these enzymes and even increasing their activity, is the immobilization of laccases on different carriers. In the process of immobilization, the enzyme is bonded to a solid carrier which is insoluble in the reaction mixture. In this process, the movement of the enzyme in space is severely restricted, while its catalytic activity is still maintained. One of the carriers used to create recyclable biocatalyst systems is mineral. Minerals as inorganic carriers are inexpensive, abundant in nature, readily available, and also have high biocompatibility. The objective of the present study was to investigate the adsorption properties of Laccase enzyme from T. versicolor fungus on montmorillonite K10 and zeolite minerals using Langmuir, Freundlich, Temkin and Dubinin–Radushkevich isotherms.
Materials and Methods: For this study, the pure laccase enzyme (> 10U mg-1), 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid (ABTS) substrate and montmorillonite K10 mineral (with a specific surface area of 220-270 m2/g and a cation exchange capacity (CEC) equal to 30 meq 100 g-1) were purchased from Sigma-Aldrich. Zeolite mineral was provided from a mine located in southeast Semnan province. Scanning electron microscopy (SEM) images of both minerals, CEC of zeolite with sodium acetate solution (pH=8.2) and zeolite surface area were determined. X-ray Diffraction (XRD) and X-ray Fluorescence (XRF) analyzes of zeolite mineral were also done. In order to immobilize laccase on the minerals, 200 mg of both minerals were activated by shaking with 0.5N HNO3 for 2 hours and a solution of 2% 3-aminopropyltriethoxylane in acetone. The activated minerals were treated by a 5% solution of glutaraldehyde in a 0.1M sodium acetate buffer (pH=5) and were shaken for 24 hours with 0.25-2.0 mg of the laccase dissolved in the buffer. Langmuir, Freundlich, Temkin and Dubinin–Radushkevich isotherms were determined. The experiment was carried out at a constant temperature of 20°C. The results were analyzed using the MSTATC software and the means of the data were compared using Duncan’s multiple range test.
Results and Discussion: Based on the results, the zeolite type was clinoptilolite with a chemical formula of (Na,K,Ca)2.5Al3(Al,Si)2Si13O36.12H2O. Moreover, BET Surface Area, Langmuir Surface Area, t-Plot Micropore Area and t-Plot External Surface Area of zeolite were 40.2712, 645.4780, 3.5188 and 36.7524 m2/g, respectively. Laccase absorption on montmorillonite K10 showed the highest compliance first with the Dubinin–Radushkevich model (R2=0.97) and then with the Langmuir adsorption isotherm model (R2=0.96). Based on the D-R model, the theoretical monolayer sorption capacity (qm) and the constant of the sorption energy (ß) of montmorillonite K10 were 3 mg/g and 0.62 (×103 mol2/J2), respectively. According to the Langmuir isotherm, there was probably a homogeneous distribution of active sites on the montmorillonite K10 mineral surface. On the other hand, laccase adsorption on zeolite showed the best compliance with the Freundlich model (R2=0.87). Accordingly, sorption capacity (KF) of zeolite was 0.05 mg/g (L/mg)1/n. The amount of n parameter as an indicator of the favorability of sorption process was 1.49 demonstrating favorable absorption condition. The values of R2 obtained for Temkin isotherm model were, however, equal in both minerals (R2=0.62 for montmorillonite K10 and R2 = 0.61 for zeolite), and based on this model, the adsorption process was likely to be exothermic. According to the values of the equilibrium parameter (RL) of montmorillonite K10, the absorption was favorable. However, with increasing the initial concentration of laccase, the amount of RL approached zero indicating the laccase adsorption on the mineral is more favorable at higher initial concentrations of laccase. Based on % Removal parameter, the highest percentage of laccase adsorption on montmorillonite K10 and zeolite was related to concentrations of 250 and 125 mg/L, respectively, which showed a statistically significant difference with other concentrations.
Conclusion: In general, laccase absorption on montmorillonite K10 showed the best fit with Dubinin–Radushkevich and Langmuir adsorption isotherm models. On the other hand, adsorption of laccase on zeolite mineral showed the best fit with Freundlich model. A higher degree of steric hindrance and conformational changes in the enzyme structure is likely to occur and subsequently, the catalytic efficiency of the enzyme complexes may decrease. Therefore, montmorillonite is more suited to be used as a carrier of laccase enzymes. However, complementary studies such as kinetic tests will help to make final decisions.
 

Keywords

1- Balarak D., Kord Mostafapour F., Azarpiraand H., and Joghataei A. 2017. Langmuir, Freundlich, Temkin and Dubinin–radushkevich isotherms studies of equilibrium sorption of ampicilin unto montmorillonite nanoparticles. Journal of Pharmaceutical Research International, 20: 1-9.
2- Chapman H.D. 1965. Cation exchange capacity. p. 891-901. In C.A. Black (ed.) Methods of Soil Analysis. Part 2. American Society of Agronomy, Madison, Wis, USA.
3- Cowan D.A., and Fernandez-Lafuente R. 2011. Enhancing the functional properties of thermophilic enzymes by chemical modification and immobilization. Enzyme and Microbial Technology, 49: 326–346.
4- Dubinin M.M., Zaverina E.D., and Radushkevich L.V. 1947. Sorption and structure of active carbons. I. Adsorption of organic vapors. Zhurnal Fizicheskoi Khimii, 21: 1351–1362.
5- Dwevedi A. 2016. Basics of Enzyme Immobilization. p. 21-44. In Enzyme Immobilization. Chapter 2. Springer International Publishing Switzerland.
6- Eastoe J., and Dalton J.S. 2000. Dynamic surface tension and adsorption mechanisms of surfactants at the air water interface. Advances in Colloid and Interface Science, 85: 103–144.
7- Freundlich H. 1906. Über die adsorption in lösungen (adsorption in solution). Zeitschrift für Physikalische Chemie, 57: 384–470.
8- Ghiaci M., Aghaei H., Soleimanian S., and Sedaghat M.E. 2009. Enzyme immobilization Part 1. Modified bentonite as a new and efficient support for immobilization of Candida rugose lipase. Applied Clay Science, 43: 289–295.
9- Gianfreda L., and Bollag J.M. 1994. Effect of soils on the behavior of immobilized enzymes. Soil Science Society of America Journal, 58: 1672–1681.
10- Habeeb A.F.S.A., and Hiramoto R. 1968. Reaction of proteins with glutaraldehyde. Archives of Biochemistry and Biophysics, 126: 16-26.
11- Hall K.R., Eagleton L.C., Acrivos A., and Vermeulen T. 1966. Pore- and solid- diffusion kinetics in fixed-bed adsorption under constant-pattern condition. Industrial and Engineering Chemistry Fundamentals, 5: 212–223.
12- Hameed B.H., Mahmoud D.K., and Ahmad A.L. 2008. Equilibrium modeling and kinetic studies on the adsorption of basic dye by a low-cost adsorbent: coconut (Cocos nucifera) bunch waste. Journal of Hazardous Materials, 158: 65–72.
13- Ho Y.S., and McKay G. 1998. Sorption of dye from aqueous solution by peat. Chemical Engineering, 70: 115–124.
14- Ho Y.S., Huang C.T., and Huang H.W. 2002. Equilibrium sorption isotherm for metal ions on tree fern. Process Biochemistry, 37: 1421–1430.
15- Jesionowski T., Zdarta J., and Krajewska B. 2014. Enzymes immobilization by adsorption: A review. Adsorption, 20: 801–821.
16- Lai C., Zeng G.M., Huang D.L., Zhao M.H., Huang H.L., Huang C., Wei Z., Li N.J., Xu P., Zhang C., and Xie G.X. 2013. Effect of ABTS on the adsorption of Trametes versicolor laccase on alkali lignin. International Biodeterioration and Biodegradation, 82: 180-186.
17- Linke D., Bouws H., Peters T., Nimtz M., Berger R.G., and Zorn H. 2005. Laccases of Pleurotus sapidus: Characterization and cloning. Journal of Agricultural and Food Chemistry, 53: 9498−9505.
18- Majeau J.A., Brar S.K., and Tyagi R.D. 2010. Laccases for removal of recalcitrant and emerging pollutants. Bioresource Technology, 101: 2331–2350.
19- Makboul H.E., and Ottow J.C.G. 1979. Michaelis constant (Km) of acid phospatase as affected by montmorillonite, illite, and kaolinite clay minerals. Microbial Ecology, 5: 207-213.
20- Rosevear A., Kennedy J.F., and Cabral J.M.S. (Eds), 1987. Immobilised Enzymes and Cells, IOP Publishing Ltd., Bristol.
21- Ruggiero P., Sarkar J.M., and Bollag J.M. 1989. Detoxification of 2,4-dichlorophenol by a laccase immobilized on soil or clay. Soil Science, 147: 361–370.
22- Saltali K., Sari A., and Aydin M. 2007. Removal of ammonium ion from aqueous solution by natural Turkish (Yildizeli) zeolite for environmental quality. Journal of Hazardous Materials, 141: 258–263.
23- Sheldon R.A. 2007. Enzyme immobilization: The quest for optimum performance. Advanced Synthesis and Catalysis, 49: 1289–1307.
24- Sheldon R.A., and van Pelt S. 2013. Enzyme immobilisation in biocatalysis: Why, what and how? Chemical Society Reviews, 42: 6223–6235.
25- Shindo H., Watanabe D., Onaga T., Urakawa M., Nakahara O., and Huang Q. 2002. Adsorption, Activity, and Kinetics of Acid Phosphatase as Influenced by Selected Oxides and Clay Minerals. Soil Science and Plant Nutrition, 48: 763-767.
26- Temkin M.J., and Pyzhev V. 1940. Recent modifications to Langmuir isotherms. Acta Physiochimica U.R.S.S, 12: 217–222.
27- Treybal R.E. 1968. Mass transfer operations. 2nd ed. McGraw Hill, New York.
28- Weber T.W., and Chakraborti R.K. 1974. Pore and solid diffusion models for fixed-bed adsorbers. American Institute of Chemical Engineers Journal (AICHE), 20: 228-238.
29- Wohlgemuth R. 2010. Biocatalysis—Key to sustainable industrial chemistry. Current Opinion in Biotechnology, 21: 713–724.
30- Wong L.S., Khan F., and Micklefield J. 2009. Selective covalent protein immobilization: Strategies and applications. Chemical Reviews, 109:4025–4053.
31- Zdarta J., Meyer A.S., Jesionowski T., and Pinelo M. 2018. A General overview of support materials for enzyme immobilization: Characteristics, properties, practical utility. Catalysts, 8:92.
32- Zheng H., Liu D., Zheng Y., Liang S., and Liu Z. 2009. Sorption isotherm and kinetic modeling of aniline on Cr-bentonite. Journal of Hazardous Materials, 167: 141–147.
33- Zheng H., Wang Y., Zheng Y., Zhang H., Liang S., and Long M. 2008. Equilibrium, kinetic and thermodynamic studies on the sorption of 4-hydroxyphenol on Cr-bentonite. Chemical Engineering, 143: 117–123.
CAPTCHA Image