رهاسازی عناصر روی، منگنز و منیزیم از Mg-Zn-Mn-Al-LDH: اثر اسید مالیک و نسبت کاتیون دو به سه ظرفیتی

نوع مقاله : مقالات پژوهشی

نویسندگان

• زهرا موحدی راد ¹
• محسن حمیدپور ²

¹ گروه کشاورزی، دانشگاه پیام نور، تهران، ایران

² گروه علوم خاک، دانشکده کشاورزی، دانشگاه ولی‌عصر (عج) رفسنجان، رفسنجان، ایران

10.22067/jsw.2024.88568.1414

چکیده

امروزه هیدروکسیدهای دوگانه لایه­ای به­عنوان گروهی از ترکیبات با قابلیت رهاسازی تدریجی عناصر غذایی به­طور ویژه مورد توجه قرار گرفته­اند. در پژوهش حاضر Mg-Zn-Mn-Al-LDH با آنیون بین لایه­ای نیترات و نسبت­های متفاوت کاتیون دو به سه ظرفیتی در دو نوع LDH (3:1) و LDH (4:1) به روش هم­رسوبی تهیه و ویژگی­های آن مورد مطالعه قرار گرفت. به­منظور بررسی اثرات نسبت کاتیون دو به سه ظرفیتی موجود در ساختار LDH، اسید مالیک و pH، در رهاسازی عناصر روی، منگنز و منیزیم در زمان­های مختلف مطالعات پیمانه­ای انجام گرفت. مدل­های مختلف سینتیکی جهت بررسی سینتیک رهاسازی عناصر استفاده شد. اثر اسید مالیک بر رهاسازی عناصر از هر دو نوع LDH قابل توجه بوده به­طوری‌که سرعت اولیه رهاسازی روی، منگنز و منیزیم از LDH (3:1) به­ترتیب افزایش 75/3، 4/82 و 6/0 برابری نسبت به شرایط بدون حضور اسید مالیک داشت و سرعت اولیه رهاسازی عناصر روی، منگنز و منیزیم از LDH (4:1) به­ترتیب 75/84، 39/3 و 64/1 برابر نسبت به شاهد افزایش یافت. همچنین رهاسازی عناصر در زمان­های اولیه با سرعت بیشتر و بعد از زمان 60 دقیقه با سرعت کمتر انجام گرفت. از بین مدل­های مختلف سینتیکی بررسی شده، مدل­های شبه مرتبه دوم و الوویچ به‌دلیل دارا بودن ضریب تبیین بالاتر و خطای استاندارد کمتر جهت برازش بر داده­های سینتیکی انتخاب گردیدند. بررسی اثر تغییرات pH محیط (محدوه بین 5 تا 10) بر رهاسازی عناصر نشان داد که کاهش pH بر روند رهاسازی عناصر از این ترکیبات اثر افزایشی داشته و در تمام شرایط مورد مطالعه رهاسازی عناصر از LDH (4:1) نسبت به LDH (3:1) بیشتر بود. به‌طور کلی با توجه به پتانسیل مناسب رهاسازی عناصر روی و منگنز از این ترکیبات، ممکن است LDHs به­عنوان کود کندرهای روی و منگنز برای گیاهان مفید باشند که بررسی آن نیازمند مطالعه در حضور گیاه می­باشد.

کلیدواژه‌ها

• اسید آلی
• عناصر کم‌مصرف
• کود کندرها
• هیدروکسید دوگانه لایه‌ای

موضوعات

• علوم خاک

عنوان مقاله [English]

Release of Zinc, Manganese and Magnesium from Mg-Zn-Mn-Al-LDH: Effect of Malic Acid and Divalent to Trivalent Cation Ratios in Mineral Structure

نویسندگان [English]

• Z. Movahedi Rad ¹
• M. Hamidpour ²

¹ Department of Agriculture, Payame Noor University, Tehran, Iran

² Soil Science Department, Faculty of Agriculture, Vali-e-Asr University of Rafsanjan, Rafsanjan, Iran

چکیده [English]

Introduction 
Recently, layered double hydroxides (LDHs) have attracted significant attention due to their various applications, particularly as slow-release fertilizers for essential plant nutrients. Several studies have reported the release of nitrate and phosphorus from LDHs. Additionally, micronutrients such as zinc (Zn), copper (Cu), and manganese (Mn) can be structurally incorporated into the metal hydroxide layers. Recent research indicates that LDHs have considerable potential for releasing these micronutrients. However, further studies are needed to enhance our understanding of the mechanisms and reactions of LDHs under different conditions. Currently, there is a lack of information regarding the divalent (M²⁺) to trivalent cation (M³⁺) ratios in LDHs and the influence of malic acid on the release of Zn, Mn, and magnesium (Mg) from these compounds. This study aimed to investigate the effects of malic acid and the ratio of M²⁺/M³⁺ on the kinetics release of Zn, Mn and Mg from Mg-Zn-Mn-Al-LDH intercalated with nitrate.
 
Materials and Methods
All chemicals used in this study including malic acid (C₄H₆O₅), KCl, Zn(NO₃)₂.6H₂O, Mn(NO₃)₂.4H₂O, Mg(NO₃)₂.6H₂O and Al(NO₃).9H₂O were of analytical grades, purchased from Chem-Lab or Merck Chemical Corporations. The solutions were made with the decarbonated ultrapure water (electrical resistivity = 18 MΩcm). The LDHs were synthesized by co-precipitation method at constant pH=9.2-9.6. Two types of LDHs were synthesized with varying the M⁺²(Zn+Mn+Mg)/M⁺³(Al) 3:1 and 4:1 in the precursor solution while being stirred vigorously in a nitrogen atmosphere. The pH was kept at 9.2-9.6 by adding volumes of 3 M NaOH. The crystals of LDH were ripened in the mixture for 2 h and after that, the precipitates were centrifuged at 3000 rpm for 20 min and washed several times with distilled water and placed in an oven at 70 ^°C for 8 h to dry. The chemical composition of the synthesized LDHs was determined by furnace atomic absorption spectrophotometry (SavantAA, GBC) after acid digestion. The physical, chemical, and morphological characteristics of the LDHs were determined using X-ray diffraction analysis (Panalytical x Pert ProX-ray diffractometer), Fe-SEM (Sigma VP), FT-IR (Nicolet iS10 spectrometer), and BET (BELSORP Mini II) techniques. A batch study was done to determine the effect of different ratios of M²⁺/M³⁺ in LDHs and the effect of malic acid on release of Zn, Mn, and Mg from LDH (3:1) and LDH (4:1). Briefly, 0.01 g of synthesized LDH were put in a centrifuge tube mixed with 10 ml background electrolyte (KCl 0.01 M) and 1.25 mM malic acid in initial pH=6-7 and constant temperature (25±0.5 °C). Blank samples (without ligand) were also considered. Suspensions were shaken at periods ranging from 5 to 720 min agitation (180 rpm). Then, the supernatant solution was separated using a centrifuge at a speed of 4000 rpm for 20 min. Zn, Mn, and Mg concentrations in supernatants solutions were determined by graphite furnace atomic absorption spectrophotometry. The effect of pH in the range of 5 to 10 on the release of Zn, Mn, and Mg from LDH was also studied. Two equations (pseudo-second-order and Elovich) were used to fit the kinetics data.
 
Results and Discussion
The results showed that the calculated molar ratio of divalent cation to trivalent cation was similar to their molar ratio in the solution prepared for the synthesis of LDH samples. The X-ray diffraction patterns of LDH (3:1) and LDH (4:1) samples showed the existence of strong and sharp peaks for 003 and 006 plates. Accordingly, the reflections of the 003 and 006 plates revealed the layered structure of the synthesized LDH materials. Two bands of FT-IR spectrums around 3480 and 1620 cm^-1 for all synthesized LDH materials designated stretching vibrations of the O-H group of hydroxide layers and the interlayer water molecules. The sharp characteristic band around 1382 cm⁻¹ in LDH (3:1) and band around 1354 cm^-1 in LDH (4:1) was attributed to the antisymmetric stretching mode of nitrate anion in LDH. The specific surface area of LDH (3:1) and LDH (4:1) were 5.50 m²g^-1 and 16.54 m²g^-1 respectively. The average pore diameters in LDH (3:1) and LDH (4:1) were 1.92 nm and 2.55 nm, respectively. Time-dependent cumulative release of Zn, Mn, and Mg from LDH (3:1) and LDH (4:1) in the presence and absence of malic acid was investigated. Time-dependent Zn, Mn, and Mg release from LDH (3:1) and LDH (4:1) was accelerated in the presence of malic acid. The Zn, Mn, and Mg release from the LDHs was likely to be separated into two stages. In the initial stage from 0 to 60 min, the release rate of Zn, Mn, and Mg was rapid, then either remained constant or slightly enhanced during 60–720 min.  In this research, among the non-linear models used to determine the release kinetics of Zn, Mn, and Mg, the result with the highest R² values was chosen. The R² values were 0.91–0.99, 0.93–0.99, 0.93–0.99, 0.89-0.99, and 0.55–0.86 for pseudo-first-order, pseudo-second-order, Elovich, power function, and parabolic diffusion, respectively. So, pseudo-second-order and Elovich models were used to analyze kinetic data. The amounts of release of Zn, Mn and Mg were higher from LDH (4:1) than from LDH (3:1) because of greater specific surface area, volume, and pore diameter in LDH (4:1). A comparison of metal release versus time profiles exhibited that dissolution was greatly dependent on the pH.
 
Conclusion
The results of this research indicated that the release of Zn, Mn, and Mg from layered double hydroxides (LDHs) was influenced by factors such as time, ligand, solution pH, and the type of LDH. According to the kinetics models fitted to the experimental data, the release rate of Zn, Mn, and Mg from LDH (4:1) was higher than that from LDH (3:1). In both types of LDHs, the presence of malic acid significantly increased both the rate and amount of Zn, Mn, and Mg release compared to the absence of malic acid. While this study demonstrated that varying the ratios of divalent to trivalent cations can influence the amount and rate of Zn and Mn release, further greenhouse studies are required to confirm the effectiveness of LDH as a slow-release fertilizer in calcareous soils.

کلیدواژه‌ها [English]

• Layered double hydroxide
• Organic acid
• Micronutrients
• Slow-release fertilizer

©2024 The author(s). This is an open access article distributed under Creative Commons Attribution 4.0 International License (CC BY 4.0).

مراجع

1. Adeleke, R., Nwangburuka, C., & Oboirien, B. (2017). Origins, roles and fate of organic acids in soils: A review. South African Journal of Botany, 108, 393-406. https://doi.org/10.1016/j.sajb.2016.09.002
2. Atafar, Z., Mesdaghinia, A., Nouri, J., Homaee, M., Yunesian, M., Ahmadimoghaddam, M., & Mahvi, A.H. (2010). Effect of fertilizer application on soil heavy metal concentration. Environmental Monitoring and Assessment, 160(1-4), 83-89. https://doi.org/1007/s10661-008-0659-x
3. Baranimotlagh, M., & Gholami, M. (2013). Time-Dependent zinc desorption in some calcareous soils of Iran. Pedosphere, 23(2), 185–193. https://doi.org/10.1016/S1002-0160(13)60006-5
4. Berber, M.R., Hafez, I.H., Minagawa, K., & Mori, T. (2014). A sustained controlled release formulation of soil nitrogen based on nitrate-layered double hydroxide nanoparticle material. Journal of Soils and Sediments, 14, 60-66. https://doi.org/10.1007/s11368-013-0766-3
5. Cheng, X., Huang, X., Wang, X., & Sun, D. (2010). Influence of calcination on the adsorptive removal of phosphate by Zn–Al layered double hydroxides from excess sludge liquor. Journal of Hazardous Materials, 177(1-3), 516-523. https://doi.org/10.1016/j.jhazmat.2009.12.063
6. De Castro, G.F., Zotarelli, L., Mattiello, E.M., & Tronto, J. (2020). Alginate beads containing layered double hydroxide intercalated with borate: a potential slow-release boron fertilizer for application in sandy soils. New Journal of Chemistry, 44, 16965-16976. https://doi.org/10.1039/D0NJ03571H
7. Essington, M.E., (2004). Soil and Water Chemistry: An Integrative Approach, 1st ed. CRCPress, Boca Raton, FL.
8. Etemadian, M., Hassani, A., Nourzadeh Haddad, M., & Hanifei, M. (2017). Effect of organic and inorganic acids on the release of nutrients in calcareous soils. Journal of Water and Soil Conservation, 24(5), 73-91. (In Persian). https://doi.org/22069/JWSC.2017.12528.2723
9. Everaert, M., Warrinnier, R., Baken, S., Gustafsson, J.P., De Vos, D., & Smolders, E. (2016). Phosphate-exchanged Mg-Al layered double hydroxides: A new slow release phosphate fertilizer. ACS Sustainable Chemistry & Engineering, 4(8), 4280–4287. https://doi.org/10.1021/acssuschemeng.6b00778
10. Everaert, M., Andelkovic, I.B., Smolders, E., Degryse, F., Baird, R., & Mclaughlin, M.J. (2023). Layered transition metal molybdates as new slow-release micronutrient fertilizer matrices for Zn, Cu, and Industrial & Engineering Chemistry Research, 62(20), 7859-7867. https://doi.org/10.1021/acs.iecr.3c00498
11. Géraud, E., Prevot, V., & Leroux, F. (2006). Synthesis and characterization of macroporous MgAl LDH using polystyrene spheres as template. Journal of Physics and Chemistry of Solids, 67(5-6), 903-908. https://doi.org/ 10.1016/j.jpcs.2006.01.002
12. Halajnia, A., Oustan, S., Najafi, N., Khataee, A.R., & Lakzian, A. (2013). Adsorption–desorption characteristics of nitrate, phosphate and sulfate on Mg–Al layered double hydroxide. Applied Clay Science, 80, 305-312. https:// doi.org/10.1016/j.clay.2013.05.002
13. Hatami, H., Fotovat, A., & Halajnia, A. (2018). Comparison of adsorption and desorption of phosphate on synthesized Zn-Al LDH by two methods in a simulated soil solution. Applied Clay Science, 152, 333-341. https:// doi.org/10.1016/j.clay.2017.11.032
14. Hatami, H., & Fotovat, A. (2023). Evaluation of Zn[Mn]-Al LDHs as matrices for release of B, Zn and Mn in a simulated soil solution. Journal of Water and Soil, 36(6), 761-771. https://doi.org/22067/jsw.2022.73093.1109
15. Hosni, K., & Srasra, E. (2010). Evaluation of phosphate removal from water by calcined-LDH synthesized from the dolomite. Colloid Journal, 72, 423-431. https://doi.org/1134/S1061933X10030178
16. Imran, A., López-Rayo, S., Magid, J., & Hansen, H.C.B. (2016). Dissolution kinetics of pyroaurite-type layered double hydroxide doped with Zn: perspectives for pH controlled micronutrient release. Applied Clay Science, 123, 56–63. https://doi.org/10.1016/j.clay.2015.12.01
17. Kameliya, J., Verma, A., Dutta, P., Arora, C., Vyas, S., & Varma, R.S. (2023). Layered double hydroxide materials: A Review on their preparation characterization and applications. Inorganics, 11(121), 1-22. https://doi.org/ 10.3390/ inorganics11030121
18. Khoshgoftarmanesh, A.H., (2007). Principles of Plant Nutrition. Isfahan University of Technology, Publishing Center. (In Persian)
19. Kpomblekou-a, K., & Tabatabai, M. (1994). Effect of organic acids on release of phosphorus from phosphate rocks. Soil Science, 158(6), 442-453.
20. López-Rayo, S., Imran, A., Bruun Hansen, H.C., Schjoerring, J.K., & Magid, J. (2017). Layered double hydroxides: Potential release-on-demand fertilizers for plant zinc nutrition. Journal of Agricultural and Food Chemistry, 65(40), 8779–8789. https://doi.org/10.1021/acs.jafc.7b02604
21. Mortvedt, J.J., Cox, F.R., Shuman, L.M., & Welch, R.M. (1991). Micronutrients in Agriculture. Soil Science Society of America, Inc. Madison, Wisconsin, USA.
22. Oburger, E., Kirk G.J.D., Wenzel, W.W., Puschenreter, M., & Jones, D.L. (2009). Interactive effects of organic acids in the rhizosphere. Soil Biology and Biochemistry, 41(3), 449-457. https://doi.org/10.1016/ j.soilbio.2008.10.034
23. Parello, M.L., Rojas, R., & Giacomelli, C.E., (2010). Dissolution kinetics and mechanism of Mg–Al layered double hydroxides: a simple approach to describe drug release in acid media. Journal of Colloid and Interface Science, 351(1), 134-139. https://doi.org/10.1016/j.jcis.2010.07.053
24. Roy, A.S., de Beer, M., Pillai, S.K., & Ray, S.S. (2023). Application of Layered Double Hydroxides as a Slow-Release Phosphate Source: A comparison of hydroponic and soil systems. ACS omega, 8(17), 15017-15030. https://doi.org/10.1021/acsomega.2c07862
25. Shafigh, M., Hamidpour, M., & Furrer, G. (2019). Zinc release from Zn-Mg-Fe (III)-LDH intercalated with nitrate, phosphate and carbonate: The effects of low molecular weight organic acids. Applied Clay Science, 170, 135-142. https://doi.org/10.1016/j.clay.2019.01.016
26. Songkhum, P., Wuttikhun, T., Chanlek, N., Khemthong, P., & Laohhasurayotin, K. (2018). Controlled release studies of boron and zinc from layered double hydroxides as the micronutrient hosts for agricultural application. Applied Clay Science, 152, 311–322. https://doi.org/10.1016/j.clay.2017.11.028
27. Sparks, D.L., Singh, B., & Siebecker, M.G. (2022). Environmental soil chemistry (Third edition). Elsevier.
28. Strobel, B.W. (2001). Influence of vegetation on low-molecular-weight carboxylic acids in soil solution—a review. Geoderma, 99(3-4), 169-198. https://doi.org/10.1016/S0016-7061(00)00102-6
29. Van Hees, P.A.W., Lundstrom, U.S., & Giesler, R. (2000). Low molecular weight organic acids and their Al-complexes in soil solution-composition, distribution and seasonal variation in three podzolized soils. Geoderma, 94(2-4), 173-200. https://doi.org/10.1016/S0016-7061(98)00140-2
30. Wang, W., & Lu, Y., (2018). Analysis of the mean absolute error (MAE) and the root mean square error (RMSE) in assessing rounding model. IOP Conf. Series: Materials Science Engineering 324, 012049. https://doi.org/10.1088/ 1757-899X/324/1/012049
31. Wang, X., Zhao, H., Chang, L., Yu, Z., Xiao, Z., Tang, S., & Huang, C. (2022). First-principles study on interlayer spacing and structure stability of NiAl-layered double hydroxides. ACS Omega, 7(43), 39169–39180. https:// doi.org/10.1021/acsomega.2c05067
32. Zhang, L., Li, F., Evans, D.G., & Duan, X. (2010). Cu− Zn−(Mn)−(Fe)− Al layered double hydroxides and their mixed metal oxides: physicochemical and catalytic properties in wet hydrogen peroxide oxidation of phenol. Industrial & Engineering Chemistry Research, 49(13), 5959-5968. https://doi.org/10.1021/ie9019193
33. Zhang, S., Kano, N., & Imaizumi, H. (2016). Synthesis and characterization of LDHs (layered double hydroxides) intercalated with EDTA (ethylenediaminetetracetic acid) or EDDS (N, N'-1, 2-ethanediylbis-1-aspartic acid). Journal of Environmental Science and Engineering, A(5), 549-558. https://doi.org/17265/2162-5298/2016.11.001
34. Zumreoglu-Karan, B., & Ay, A.N. (2012). Layered double hydroxides-multifunctional nanomaterials. Chemical Papers, 66(1), 1-10. https://doi.org/10.2478/s11696-011-0100-8